吉林液壓升降機油溫過高的解決方法很簡單，首先要正常分析其產生原因。引起吉林升降機油溫過高的原因很多，歸納起來主要有以下兩點。Jilin hydraulic lift oil temperature is too high to solve the problem is very simple, first of all to the normal analysis of its causes. The reason for the high temperature of the engine oil in Jilin is too high.

設計不當。包括吉林液壓升降機系統中沒有卸荷回路；油箱儲油量太小，致使油液循環太快，冷卻器冷卻作用差，且高負荷 長時工作；液壓元件選用不當、管路設計不合理及運動元件機械摩擦產生的熱量等。Improper design. Including Jilin hydraulic elevator system without unloading circuit; the oil tank is too small, resulting in oil cycle too fast, the cooler cooling effect is poor, and the high load working for long time; the improper selection of hydraulic components, piping design unreasonable and mechanical motion components of friction heat.

使用不當。包括誤用粘度太大的油液，引起吉林升降機液壓損失過大；液壓系統混入空氣，磨粒、雜質等被吸附在過濾器的濾芯上；液壓油箱內油位過低；液壓油冷卻循環系統工作環境溫度過高等。Improper use. Including the misuse of oil viscosity is too large, causing the Jilin elevator hydraulic loss is too large; the air mixed with the hydraulic system, abrasive and other impurities are adsorbed on the filter cartridge; the hydraulic oil in the oil level is too low; the hydraulic oil cooling system for high temperature working environment.